[Equest-users] Model Chiller as per efficiency

[Jain, Siddharth (Gurgaon) via Equest-users]

Dear all,
For one project I have modelled chiller on its full load efficient but the requirement of the project is to model that chiller as per the efficiency level as per snapshot shown below. Can anyone guide me how can I model these type of chillers in eQuest? Looking forward for your positive response.
[cid:image001.png at 01D22E19.F7387C60]

Thanks & Regards,

Siddharth Jain


Information in this email and any attachments is confidential and intended solely for the use of the individual(s) to whom it is addressed or otherwise directed. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the Company. Finally, the recipient should check this email and any attachments for the presence of viruses. The Company accepts no liability for any damage caused by any virus transmitted by this email. All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161024/3922e4fa/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 53435 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161024/3922e4fa/attachment.png>