[Equest-users] VFD fan motor in simulation results

[Omar ElRawy via Equest-users]

Dear all,
I have a VAV system, with an AHU fan motor that operates by a VFD. The VFD
changes motor speed based on duct's pressure sensor.

Now I just need to know how to read the simulated hour by hour motor's
power in KW. I mean that the motor's rated power is 8 KW, but it is not
expected to be drawing the 8 KW all day, knowing that I defined a variable
speed as fan control, and a on/off/flag schedule to eQuest. So where in the
simulation output can I read this change in motor's KW, if possible?

Any help would be appreciated,


Best Regards,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161025/25299b9f/attachment-0005.htm>