[Equest-users] 答复: Revit importation

Wed Nov 2 19:21:00 PDT 2016

Hi Patrick,

I imported Revit model into eQUEST by referring to this video: https://www.youtube.com/watch?v=LTp9__t9Ni4

you can begin from part 1. It works for me at this moment, I completed the building geometry, envelope construction and input internal loads.

Zarah

[https://www.bing.com/th?id=OVP.V554fe27cfb4c53075faa756922711d19&pid=Api]<https://www.youtube.com/watch?v=LTp9__t9Ni4>

Exporting from Revit MEP to eQUEST Part 2.mp4<https://www.youtube.com/watch?v=LTp9__t9Ni4>
www.youtube.com
How to build energy model geometry in Revit MEP 2012 and export to eQUEST. Part 2.

________________________________
发件人: Equest-users <equest-users-bounces at lists.onebuilding.org> 代表 Kathryn Kerns via Equest-users <equest-users at lists.onebuilding.org>
发送时间: 2016年11月1日 16:59
收件人: equest-users at lists.onebuilding.org
主题: [Equest-users] FW: Revit importation

Sorry, I forgot to include the eQuest list address.

Kathryn Kerns

Systems Specialist

BCE Engineers, Inc.

| Ph: 253.922.0446 | Fx: 253.922.0896 |

From: Kathryn Kerns
Sent: Tuesday, November 01, 2016 9:39 AM
To: 'Lapierre, Patrick'; Bishop, Bill
Subject: RE: Revit importation

Everyone, I had a little time this summer to check this out, and I was not happy with the results. The building volumes may match but there were some serious floor, roof and lack of adiabatic wall issues. The model results did not seem to grasp the concept of a complete volume with all sides, a top and a bottom. There were many sides, tops and bottoms missing. It took more work to put those pieces back in than to make the model from scratch.

The person I had working on this issue was familiar with Revit and tried very hard with the Revit tools available to create a file to send to the Green Building studio that would generate all the walls, tops and bottoms and he couldn’t do it. We finally gave up. It is odd, because all the coordinates show up in the gbXML file, but for some reason the Green Building Studio model is quite content to leave the interior floors and ceilings blank along with some interior walls.

My conclusion was, Revit and the Green building studio grasp the concept of exterior surfaces well, but do not understand how to model interiors, especially floor to floor.

My opinion.

Kathryn Kerns

Systems Specialist

BCE Engineers, Inc.

| Ph: 253.922.0446 | Fx: 253.922.0896 |

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Lapierre, Patrick via Equest-users
Sent: Tuesday, November 01, 2016 7:53 AM
To: Bishop, Bill
Cc: equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>
Subject: Re: [Equest-users] Revit importation

Thank you for your input Bill, very much appreciated.

I’m always looking for ways to save time in the modeling. Having a reliable way of importing an architectural model into eQUEST would most likely go along that way.

I’m wondering what’s the level of success of this method and how exactly the zoning would be done.

I’ll try to look a little more into this.

[Bouthillette Parizeau]<http://www.bpa.ca/>

Patrick Lapierre_ing.

plapierre at bpa.ca<mailto:plapierre at bpa.ca>

De : Bishop, Bill [mailto:bbishop at pathfinder-ea.com]
Envoyé : 1 novembre 2016 10:29
À : Lapierre, Patrick <plapierre at bpa.ca<mailto:plapierre at bpa.ca>>
Cc : equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>
Objet : RE: Revit importation

My apologies. Correspondence is below.

~Bill

From: Krishnan Gowri [mailto:krishnan.gowri at autodesk.com]
Sent: Tuesday, June 14, 2016 11:55 AM
To: Bishop, Bill <bbishop at pathfinder-ea.com<mailto:bbishop at pathfinder-ea.com>>
Subject: RE: Green Building Studio - current and future interoperability with DOE-2.2?

We have a reliable DOE-2, E+ and gbXML export from both GBS and Insight 360 of the Revit Energy Analytical Model.  There are several energy settings options which you can specify in creating this model.  Though the surfaces/geometry from architectural model may be broken-up or consolidated in the model creation, it is within 1% of the total area/volume.

If you need any assistance with workflows to facilitate this process, let us know.

Thanks, -krishnan

Krishnan Gowri, Ph.D., LEED AP

Principal Engineer – Building Performance Analysis

MOBILE +1 425 273-0190

[Description: Email_Signature_Logobar]

From: Bishop, Bill
Sent: Tuesday, November 01, 2016 10:28 AM
To: 'Lapierre, Patrick' <plapierre at bpa.ca<mailto:plapierre at bpa.ca>>
Cc: 'equest-users at lists.onebuilding.org' <equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>>
Subject: RE: Revit importation

Hi Patrick,

I received the reply below from Autodesk  regarding exporting from Revit. I have not tried it and will leave it to others to comment on their level of success with the workflow.

I don’t believe the feature for direct import from REVIT is a priority for the eQUEST development team.

Regards,

~Bill

William Bishop, PE, BEMP, BEAP, CEM, LEED AP | Pathfinder Engineers & Architects LLP

Senior Energy Engineer

[cid:image003.jpg at 01D23422.023ED3D0]  [cid:image004.jpg at 01D23422.023ED3D0]

134 South Fitzhugh Street                 Rochester, NY 14608

T: (585) 698-1956                        F: (585) 325-6005

bbishop at pathfinder-ea.com<mailto:wbishop at pathfinder-ea.com>             www.pathfinder-ea.com<http://www.pathfinder-ea.com/>

[http://png-5.findicons.com/files/icons/977/rrze/720/globe.png]Carbon Fee and Dividend - simple, effective, and market-based.

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Lapierre, Patrick via Equest-users
Sent: Tuesday, November 01, 2016 8:21 AM
To: equest <equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>>
Subject: [Equest-users] Revit importation

Hi everyone,

Is anyone aware of a way to import a 3D model from Revit directly into eQUEST?

I’ve been using version 3.64 of eQUEST and as far I as know, it’s impossible in that version (aside from extracting 2D plans and importing them into eQUEST). I was wondering if a newer version of eQUEST could get the 3D job done with a straight importation from Revit (it would be a true blessing).

  [Bouthillette Parizeau] <http://www.bpa.ca/>

Patrick Lapierre_ing.

plapierre at bpa.ca<mailto:plapierre at bpa.ca>   |  www.bpa.ca<http://www.bpa.ca>  |  t: 5143833747x2807

Les informations contenues dans le courriel que vous venez de recevoir, y compris les pièces jointes, sont destinées à l’usage exclusif de la (ou des) personne(s) identifiée(s) comme destinataires et sont confidentielles. Si vous n’en êtes pas le destinataire, soyez avisé que tout usage en est interdit. Si vous avez reçu ce courriel par erreur, veuillez le retourner à l’expéditeur et le supprimer complètement de votre système informatique.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161103/207ee456/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1811 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161103/207ee456/attachment-0010.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 2367 bytes
Desc: image002.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161103/207ee456/attachment-0011.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 1254 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161103/207ee456/attachment-0012.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.jpg
Type: image/jpeg
Size: 1326 bytes
Desc: image004.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161103/207ee456/attachment-0013.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.png
Type: image/png
Size: 2851 bytes
Desc: image005.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161103/207ee456/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image006.jpg
Type: image/jpeg
Size: 2075 bytes
Desc: image006.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20161103/207ee456/attachment-0014.jpg>