[Equest-users] DWH Per Thermal Zone

[Sharad Kumar via Equest-users]

Hi Paul,

For configuring the DHW meter as per separate meter and separate floor
based you need to configure out two things:

1. Make different DHW loops as per the area served based on system.
2. Try linking different loops to different meter in meter tab in the
system.

For this one need to figure out the therms serving different areas out of
2000 therms per year.
Link the meter in the meter tab in system in Air side.

Also, i have tried to drag the fuels in the two parts. I think first is gas
and the residential is another based on gas or electricity.
So while creating DWH loops configure out different spaces, different
amount of therms input, different fuels and have a help on all these
factors while linking the meters in meter tab in Air-side.


*Thanks,*
Sharad.Kumar|Engineer
Green Horizon Consulting LLP
Gurgaon
India.


*From:* Equest-users [mailto:equest-users-bounces at lists.onebuilding.org
<equest-users-bounces at lists.onebuilding.org>] *On Behalf Of*Paul Diglio via
Equest-users
*Sent:* Monday, May 02, 2016 2:43 PM
*To:* John Aulbach; David Eldridge; Equest-users
*Subject:* Re: [Equest-users] DWH Per Thermal Zone



Thanks for the response guys.



I tired modeling one DWH per a zone using the zone location hoping that it
would only serve that zone, but the usage is over 2,000 therms per year so
that would be the whole building.



I might need to combine them.  The problem is that I have one floor that is
on the house fuel meter and 20 apartments that are on the residential meter
and it appears I can't separate the two .



Regards,



Paul Diglio
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160504/b1cd4666/attachment-0002.htm>