[Equest-users] Help needed regarding results.

k bk via Equest-users equest-users at lists.onebuilding.org
Fri May 13 07:44:58 PDT 2016


It is really going to depend on the location of the daylight sensor in
relation to the window. If changing the window dimensions does not effect
the light falling on the sensor it will not have an impact on it. You could
try putting two sensors in the space at different depths.

If you want to perform a much more detailed analysis you should look into
Daysim (*www.daysim.com/*
<https://www.google.com/?gws_rd=ssl#>
)





>
>
>
> *From:* Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] *On
> Behalf Of *Sitha mahalakshmi Pathuri via Equest-users
> *Sent:* Thursday, May 12, 2016 2:33 PM
> *To:* equest-users at lists.onebuilding.org
> *Subject:* [Equest-users] Help needed regarding results.
>
>
>
> Hello everyone,
>
>
>
> I have been doing an academic project where i am trying to find out the
> best percentage of facade glazing which results in optimal energy
> consumption in IT office building.
>
>
>
> Is there a possibility of doing parametric studies pertaining to change in
> facade glazing percentage or lets say WWR.
>
>
>
> I tried a floor plan with three different types of glasses and different
> percentages.
>
> But as i reduce the facade percentage from 100% to 30%  the energy
> consumption report says that there is reduction in energy consumption.but
> There is no difference in lighting loads . the only change in the report is
> for space cooling. The reduction in the glazing definitely results in
> increase in lighting loads in a fully conditioned office building.
>
>
>
> This is not being projected in the results.could some one help me on how
> to proceed in this regard.
>
>
>
> Thanking you,
>
>
>
> P.Sitha
>
> Pursuing M.Arch
>
>
>
>
>
>
>
>
>
>
> ------------------------------
> *This message and any attachments contain information intended for a
> specific party and may include sensitive or confidential material. If you
> are not the intended recipient, please do not read, copy, use, or disclose
> to others. Please notify the sender of the delivery error by reply and then
> permanently delete this message and all attachments.*
>   ­­
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160513/e3870859/attachment-0005.htm>


More information about the Equest-users mailing list