[Equest-users] Output of Space cool consumption comes in negative

Nitin Harjai nitin.harjai28 at gmail.com
Mon Mar 28 08:27:44 PDT 2016


Hi...

I have a problem regarding the equest output & I need your help so that I
can complete the project on time.

At the first step to remove the proposed case unmet hours,i have increased
the cfm of same zone by diverting the cfm of other zone which is having
zero unmet hour, in order to maintain the design CFM of particular system
throughout the model.

After simulate the model, the unmet hour of same zone has been reduced
without affecting the zone from where the CFM was diverted, but the output
of space cool consumption comes in negative. I have attached the pics of
before & after the simulation of monthly energy consumption graph.

For your information, this is the hospital project consist of  ground+7
floors+3 basements and for cooling & heating, there are two water cooled
screw chiller, two hot water generator are used on site.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160328/9fbda498/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Pic.jpg
Type: image/jpeg
Size: 200820 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160328/9fbda498/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Pic2.jpg
Type: image/jpeg
Size: 195260 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160328/9fbda498/attachment-0003.jpg>


More information about the Equest-users mailing list