[Equest-users] Simulation of a Steel Deck + concrete for an office building in eQuest 3.65

[John Aulbach]

Jose:
Happy Easter to you.
I think you can use that steel siding as deck. eQuest (DOE2) doesn't know about gravity or such, just heat flow through material based on Delta T. Wall can be tilted up or down, and that steel siding will still perform the same way.
Good luck.
John R. Aulbach, PE 

    On Saturday, March 26, 2016 6:50 PM, José Luis Bermúdez Alcocer <beralco at yahoo.com.mx> wrote:
 

 To whom it may concern:
I need to simulate in eQuest a steel deck with poured concrete over it for a slab and a roof of an office building.  I found steel siding in the drop menu in eQuest.  I am not sure if I could use this material to "trick" the software and simulate a steel deck.  Has anybody done something similar?
Kind regards,
Jose Luis Bermudez Alcocer, Ph.D., M.Arch., B.Arch.

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160327/ae8f038c/attachment-0005.htm>