[Equest-users] Spandrel Modeling

[Darryl Kasun via Equest-users]

Thanks for the spandrel clarification Brain and Chris!

On Tue, Jun 28, 2016 at 6:12 AM, Jones, Christopher via Equest-users <
equest-users at lists.onebuilding.org> wrote:

> Hi Brian,
>
> That is interesting about the MECB. If you define the spandrel as a
> window, does it get included in the glazing area for the FWDR calculation?
> Or does it get included in the opaque walls? If included in the glazing
> area, it could reduce the prescriptive glazing area significantly.
>
>
>
>
>
>
>
> [image: cid:image003.png at 01D09C46.E75BA0D0]
>
> *Christopher Jones,* P.Eng.
> Senior Engineer
>
>
>
> *WSP Canada Inc.*
>
> 2300 Yonge Street, Suite 2300
>
> Toronto, ON M4P 1E4
> T +1 416-644-4226
>
> F +1 416-487-9766
>
> C +1 416-697-0056
>
>
>
> www.wspgroup.com
>
>
>
> *From:* Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] *On
> Behalf Of *Brian Fountain via Equest-users
> *Sent:* Tuesday, June 28, 2016 8:41 AM
> *To:* Jones, Christopher
> *Cc:* equest-users at onebuilding.org
>
> *Subject:* Re: [Equest-users] Spandrel Modeling
>
>
>
> Unless you are in Manitoba where the MECB explicitly defines spandrels as
> windows.
>
>
>
> *From: *Jones, Christopher via Equest-users
>
> *Sent: *Tuesday, June 28, 2016 7:42 AM
>
> *To: *Darryl Kasun
>
> *Reply To: *Jones, Christopher
>
> *Cc: *equest-users at lists.onebuilding.org
>
> *Subject: *Re: [Equest-users] Spandrel Modeling
>
>
>
> Spandrel panels are exterior opaque walls, not glazing. SC and VT do not
> get set for opaque walls. You can building your spandrel using
> layer-by-layer or by simply specifying an R-value. A typical spandrel panel
> with 4” of semi-rigid insulation realizes about R-6 depending on the ratio
> of spandrel to framing.
>
>
>
>
>
>
>
>
>
> [image: cid:image003.png at 01D09C46.E75BA0D0]
>
> *Christopher Jones,* P.Eng.
> Senior Engineer
>
>
>
> *WSP Canada Inc.*
>
> 2300 Yonge Street, Suite 2300
>
> Toronto, ON M4P 1E4
> T +1 416-644-4226
>
> F +1 416-487-9766
>
> C +1 416-697-0056
>
>
>
> www.wspgroup.com
>
>
>
> *From:* Equest-users [mailto:equest-users-bounces at lists.onebuilding.org
> <equest-users-bounces at lists.onebuilding.org>] *On Behalf Of *Darryl Kasun
> via Equest-users
> *Sent:* Monday, June 27, 2016 7:26 PM
> *To:* equest-users at lists.onebuilding.org
> *Subject:* [Equest-users] Spandrel Modeling
>
>
>
> Hi everybody!
>
>
>
> I’m modeling spandrel sections.  I have the conductance calculated and
> just want to make sure I get the SC, VT and outside emissivity correct.
>
>
>
> I have both the shading coefficient and visible transmittance set at 0 –
> please correct me if wrong.
>
>
>
> What should I set the outside emissivity to?
>
>
>
> Thanks!
>
> Darryl
>
>
>
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160628/d6a42317/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 6574 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160628/d6a42317/attachment-0005.png>