[Equest-users] Curtain wall system - how to model baseline?

[Michael Campbell via Equest-users]

Hello,

I have a potential project in which the client is proposing a curtain wall
system.
The model will be based on ASHRAE 90.1-2013 Appendix G.
I believe the appropriate way to model this would be to have a WWR of 100%
(or near 100%) in the proposed case.  For the baseline case, the window
area would have to be reduced to get the WWR down to 40%.
Is this the correct way or is there different guidance for modeling curtain
wall systems?

Thank you,
Mike Campbell
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160728/b8143bcb/attachment-0005.htm>