[Equest-users] Evaporative cooler in V-3.65

[Nikoofard, Sara via Equest-users]

Hi Chris,

I  think my version has problem then because I cannot select indirect, direct. I will reinstall it to see what is wrong then.

Thanks for the reply.


Sara Nikoofard, PhD, LEED GA
Energy Simulation Specialist
Stantec
10160 112 Street Edmonton AB T5K 2L6
Phone: (780) 969-2260
Fax: (780) 917-7279
sara.nikoofard at stantec.com<mailto:sara.nikoofard at stantec.com>

<http://www.stantec.com>[Stantec]<http://www.stantec.com/><http://www.stantec.com>



The content of this email is the confidential property of Stantec and should not be copied, modified, retransmitted, or used for any purpose except with Stantec's written authorization. If you are not the intended recipient, please delete all copies and notify us immediately.

ü Please consider the environment before printing this email.
From: Chris Jones [mailto:Christopher.Jones at RWDI.com]
Sent: Tuesday, July 19, 2016 1:38 PM
To: Nikoofard, Sara
Cc: equest-users at lists.onebuilding.org
Subject: RE: Evaporative cooler in V-3.65

I am not following your question. I can select Evaporative Cool as System Type in the Basics dialog. If I do select Evaporative Cool, then in the Evaporative Cooling tab, I can select Indirect, Indirect/Direct or Direct.

On the other hand, if I select a different system type, then I can go to the Preconditioner tab to select Add-On Evaporative Cooling. Here the options are again Indirect, Indirect/Direct or Direct.


Christopher Jones, P. Eng.
Rowan Williams Davies & Irwin Inc.
Consulting Engineers & Scientists
901 King Street West, Suite 400, Toronto, Ontario, M5V 3H5
T: (519) 823-1311 ext 2052
M: (416) 697-0056

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Nikoofard, Sara via Equest-users
Sent: Tuesday, July 19, 2016 3:28 PM
To: equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>
Subject: [Equest-users] Evaporative cooler in V-3.65

Hi all,

I have a quick question about defining Evaporative coolers in eQUEST. In eQUEST version 3.64 when we select cooling source as "Evaporative coolers" with different heating options the system type list includes two types :

1-       Direct evaporative cooler ...

2-       Indirect/Direct evaporative cooler.
However, in equest version 3.65 the system type list is exactly the same as the one we have when we select "chilled water coils + Hot water coils" as source of cooling and heating. This means that the evaporative coolers system type list has a bug in the new version and does not let us choose evaporative cooler for HVAC system.

Has anybody encountered this problem? And is there any fix for it?

Thanks,
Sara Nikoofard
[Guelph Move]
________________________________
RWDI - One of Canada's 50 Best Managed Companies - This communication is intended for the sole use of the party to whom it was addressed and may contain information that is privileged and/or confidential. Any other distribution, copying or disclosure is strictly prohibited. If you received this email in error, please notify us immediately by replying to this email and delete the message without retaining any hard or electronic copies of same. Outgoing emails are scanned for viruses, but no warranty is made to their absence in this email or attachments. If you require any information supplied by RWDI in a different format to facilitate accessibility, contact the sender of the email, email solutions at rwdi.com<mailto:solutions at rwdi.com> or call +1.519.823.1311.
________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160719/f05958a5/attachment-0005.htm>