[Equest-users] *****SPAM***** Re: FW: DOE2 Batch Processing Error

[Joe Huang]

Drew,

The answer to your question is simple. The BDL error message says that it couldn't find 
the material "Polyurethane 1 1/2in" in the BDLLIB.DAT file. So, when you added that 
material to BDLLIB.DAT, the program then ran.   Things are actually more transparent now 
with DOE-2.2, compared to DOE-2.1E that I use.  In DOE-2.1E, BDLLIB.DAT is a binary file, 
i.e., it's not humanly readable.  In DOE-2.2, BDLLIB.DAT is a straight text file, so you 
could actually open that file with a text editor to see if indeed the missing library item 
is there or not.

Joe

Joe Huang
White Box Technologies, Inc.
346 Rheem Blvd., Suite 205A
Moraga CA 94556
yjhuang at whiteboxtechnologies.com
http://weather.whiteboxtechnologies.com for simulation-ready weather data
(o) (925)388-0265
(c) (510)928-2683
"building energy simulations at your fingertips"

On 2/5/2016 1:36 PM, Drew Morrison wrote:
>
> Looks like there’s a solution.
>
> At first, I tried copying the text replacing the text in the usrlib.dat folder in the 
> …\doe22 directory with the text from the eQ_Lib.dat file in the …\eQuest 3-64 Data\DOE-2 
> folder. That didn’t change anything. Eventually I found out that the library entries 
> triggering errors in the BDL file were not present in the BDLLIB.dat file. However, they 
> were in the original userlib.dat file. I copied the library entries for the missing 
> components (which were some construction materials, a water heater performance curve, 
> and all the hourly report library entries) into the BDLLIB.dat file, and the simulation 
> ran without a hitch:
>
> I’m not sure what the DOE2 scripts are doing with the library files, since the same 
> entries are missing in the eQuest folder’s BDLLIB file, and yet running the simulation 
> in eQuest works perfectly. Since the simulation now executes from the command line 
> successfully, the problem is solved for the moment, though I don’t feel any less 
> confused about what’s going on. And unfortunately, the simulation doesn’t appear to run 
> significantly faster, since the total elapsed time was still over 4 minutes.
>
> Still, thanks for all your help and suggestions. Despite my ongoing confusion, I feel 
> like I’ve learned a lot about what goes on behind the scenes in DOE2. And if anyone has 
> any insights as to why appending missing library entries to the BDLLIB file fixed this 
> run, I’d love to hear them.
>
> Cheers,
>
> Drew Morrison, Energy Engineer
>
> *Seventhwave*
>
> 608.210.7151 seventhwave.org
>
> *From:* Julien Marrec [mailto:julien.marrec at gmail.com]
> *Sent:* Friday, February 05, 2016 3:11 PM
> *To:* Drew Morrison <DMorrison at seventhwave.org>
> *Cc:* equest-users at lists.onebuilding.org
> *Subject:* Re: [Equest-users] FW: DOE2 Batch Processing Error
>
> Very likely because you are using the doe library and not equest's
>
> I posted something a while back with a modified bat script that allows you to choose 
> your equest version.
>
> Try and find it in the archive if you can't let me know and I'll find it next time I'm 
> on a computer
>
>
> Envoyé de mon iPhone
>
>
> Le 5 févr. 2016 à 19:04, Drew Morrison <DMorrison at seventhwave.org 
> <mailto:DMorrison at seventhwave.org>> a écrit :
>
>     Hi Everyone,
>
>     I’ve got an issue trying to run DOE-2.2 models from the command prompt using the
>     batch processing script. The .inp file is rather large (about 47,000 lines) and I’m
>     hoping to get the simulations to run a little faster by bypassing the eQuest
>     interface. I’d like to thank Ben Brannon and Joe Huang for this thread
>     (http://energy-models.com/forum/run-equest-file-command-line-doe2) which helped me
>     get started.
>
>     I’m able to run the doe22.bat script, but I’m getting an error when the script runs
>     DOEBDL. When I open up the BDL file, I get a series of errors in the exterior
>     construction layers which say “Symbol Previously Undefined”, which seem to be in
>     reference to the materials which compose the layers. However, the layers all come
>     directly from the DOE-2 library files.
>
>     Is there some reference to the library files I need to establish or have missed?
>     Right now I have the .inp file in C:\doe22, the same directory as the doe22.bat
>     file. I’ve attached the .inp file I’m trying to process, and below are excerpts from
>     my command line and the BDL file generated when I executed the script.
>
>     Thanks,
>
>     Drew
>
>     **** Command Line Screen Shot ****
>
>     <image001.png>
>
>     ***** BDL File Error Text *****
>
>          * 235 * "H2Roof Cons Layers" = LAYERS
>
>          * 236 *    MATERIAL         = ( "Blt-Up Roof 3/8in (BR01)", "Polyurethane 1 1/2in",
>
>     *ERROR**********************************************************
>     ====================== ******SYMBOL PREVIOUSLY UNDEFINED
>
>          * 237 *          "Plywd 5/8in (PW04)", "H2Roof Cons Mat 4 (31.52)" )
>
>          * 238 *    ..
>
>          *   1 * $LIBRARY-ENTRY Plywd 5/8in (PW04)              MAT             Plywood
>
>          *   2 * $Plywood, 5/8 Inch
>
>          *   3 *  TYPE=PROPERTIES TH=0.0521 COND=0.0667 DENS=34.0 S-H=0.29  ..
>
>     *ERROR****************************************************************************************
>
>     *ERROR*****MATERIAL Layer position number 3 is incomplete or undefined
>
>     Drew Morrison, Energy Engineer
>
>     *Seventhwave*
>
>     608.210.7151 seventhwave.org <http://seventhwave.org>
>
>     <ComplicatedBldg.BDL>
>
>     <ComplicatedBldg.inp>
>
>     _______________________________________________
>     Equest-users mailing list
>     http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>     To unsubscribe from this mailing list send  a blank message to
>     EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>     <mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160205/5b11be3f/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 26057 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160205/5b11be3f/attachment-0005.png>