[Equest-users] Min Allowable Supply Air Flow

[Darryl Kasun via Equest-users]

Hello again eQUESTers,

For some zones, I want to set the min. allowable zone air supply flow rate
to a certain ACH.  There is a zonal input for min. design air changes/hr
but I think eQUEST will go below this flow if possible.  Sure I can
calculate the minimum flow as cfm.ft2 or ratio but would like to not do
this work if possible!

Is there a straight-up min. allowable ACH input for eQUEST?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160824/3436e53f/attachment-0005.htm>