[Equest-users] Modeling Avionics Cooling units

[Gutschow, Ezra via Equest-users]

I'm modeling an aircraft maintenance hangar that uses "avionics cooling units" to cool off the electronics in the planes when they are under maintenance. These units are large air cooled condensing units with high static pressure fans. Since this project is for LEED, I'm modeling it as a process load for both baseline and proposed. Is there a way to make the "misc load" as a global, temperature dependent parameter?
I'm not inclined to model these as chillers, as this would be confusing during the LEED documention.
Thanks,

Ezra Gutschow, P.E., LEED AP
Senior Engineer, Mechanical Engineering
Certified Commissioning Professional
Coffman Engineers, Inc.
800 F Street | Anchorage, AK 99501
p 907.276.6664  | f 907.276.5042     www.coffman.com<http://www.coffman.com/>

LASTING creativity | results | relationships
Please consider the environment before printing this email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160815/64232dc1/attachment-0005.htm>