[Equest-users] Hourly Reports Option Missing?

[Russo, Bryan]

Nick,

You're a savior! The file export option worked (not sure why that worked but not from the D2SimViewer)! I did dive deep deep into the hourly reports, but couldn't come up with why the modified config caused my issue.

Thanks,

Bryan
_______________________________________________________________________
Bryan Russo, BESA, CMVP
Senior Engineer
Office   253.502.8822

From: Nicholas.Caton at schneider-electric.com [mailto:Nicholas.Caton at schneider-electric.com]
Sent: Friday, April 08, 2016 13:53
To: Russo, Bryan; equest-users at lists.onebuilding.org
Subject: RE: [Equest-users] Hourly Reports Option Missing?

Hi Bryan!

Try: File --> Export... --> Hourly Results from the main eQuest window (after running a simulation).

As to why D2SimViewer is acting up... maybe because it's Friday ???  Really not something I can recall running into.

If that doesn't work... You might try opening the SIM output via an eQuest 3.65 D2SimViewer and then via the D2SimViewer that comes with 3.64 to see if you end up with matching results.

If that doesn't work... do you actually have hourly reports & blocks defined?  That's almost a given if the project was generated via wizards but it's possible you may need to define/redefine them for your project meters or whatever else you're tracking.

Best of luck!

~Nick

------------------------------------------------------------------------------------------------------------------------------
Nick Caton, P.E.
  Senior Energy Engineer
  Energy and Sustainability Services
  North America Operations
  Schneider Electric

D  913.564.6361
M  785.410.3317
E  nicholas.caton at schneider-electric.com<mailto:nicholas.caton at schneider-electric.com>
F  913.564.6380

15200 Santa Fe Trail Drive
Suite 204
Lenexa, KS 66219
United States

[cid:image001.png at 01D189AB.58634A10]



From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Russo, Bryan
Sent: Friday, April 08, 2016 3:04 PM
To: equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>
Subject: [Equest-users] Hourly Reports Option Missing?

All,

I'm working on an eQuest model that was produced by another person. I am attempting to review the hourly outputs. From past experience, I am familiar with viewing the simulation BEPS results in D2SimViewr and seeing a "hourly results" button on the upper right. However, in this case, that button is missing and I cannot think of what would cause this. I'm a bit dumbfounded any guidance would be greatly appreciated.

Thanks,

Bryan
_______________________________________________________________________
Bryan Russo
Senior Engineer
Conservation Resources Management
Tacoma Power

email: brusso at ci.tacoma.wa.us<mailto:brusso at ci.tacoma.wa.us>
office   253.502.8822
cell        253.306.0670
fax          253.502.8276


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160408/9481d1cf/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 7893 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160408/9481d1cf/attachment-0005.png>