[Equest-users] Air-cooled Chiller EIRFPLR curve in eQUEST

[John Aulbach]

Hi Kusem:
I don't have too much time, but if you are holding a 44 DegF CHW temp and varying the outdoor temp (essentially your condenser), aren't you simply changing the capacity of the chiller based on outdoor temp. I believe you need to leaving the outdoor temp at a fixed temp, then apply your part load  and the equivalent kW. 
eQuest will vary the chiller peak based on outdoor loadwith onwe of the other chiller curves (guys, help me).
John Aulbach 


     On Monday, October 19, 2015 9:05 AM, Kusum Sekhalia <skusum3 at gmail.com> wrote:
   

 Hi all,
I am trying to create an air-cooled chiller EIRFPLR curve but am getting errors. I am not able to figure out what am I doing wrong? I have attached the part load data from the manufacturer. Can someone help me or provide me some information which shows step by step on how to create the curve. I am using the Design guidelines HVAC simulation pdf to create the curve but not successful so far. Please help.
Thank you in advance. 
Kusum Shekhlia
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20151019/fdb1ed8d/attachment-0005.htm>