[Equest-users] Equipment control

[Nicholas Caton]

Hi Sambhav,



If your EQUIP-CTRL is for chiller sequencing, assign it to the CHW loop to
which the chillers are attached.



If your EQUIP-CTRL is for tower sequencing, assign it to the CW to which
the heat rejection equipment is attached.



~Nick



* NICK CATON, P.E.*
*Owner*



*Caton Energy Consulting*
  306 N Ferrel

  Olathe, KS  66061

  office:  785.410.3317

www.catonenergy.com



*From:* Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] *On
Behalf Of *Sambhav Tiwari
*Sent:* Wednesday, October 07, 2015 12:36 AM
*To:* equest-users
*Subject:* [Equest-users] Equipment control



Hi Friends,



If we give sequencing to chillers by equipment control in the case shall we
assign equipment control only to CHW loop under control tab or to both
loops CHW as well as CW loop under control tab.



Regards

Sambhav
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20151007/73c200d0/attachment-0005.htm>