[Equest-users] LED lighting

[Haberl, Jeff]

Hello Fakeha:

Simulations programs like eQuest and DOE-2 don’t actually model the lighting, but rather model the heat gain from the lighting.

Therefore, all you really need is the electricity use of the intended lighting to enter into the input file, in one of several ways (i.e., Watts or Watt/ft2), then perhaps enter what type of light it is to estimate where the heat from the light is going.

Jeff

8=!  8=)  :=)  8=)  ;=)  8=)  8=(  8=)  8=()  8=)  8=|  8=)  :=')  8=) 8=?
Jeff S. Haberl, Ph.D.,P.E.inactive,FASHRAE,FIBPSA,......jhaberl at tamu.edu<mailto:........jhaberl at tamu.edu>
Professor........................................................................Office Ph: 979-845-6507
Department of Architecture............................................Lab Ph:979-845-6065
Energy Systems Laboratory...........................................FAX: 979-862-2457
Texas A&M University...................................................77843-3581
College Station, Texas, USA, 77843..............................URL:www.esl.tamu.edu
8=/  8=)  :=)  8=)  ;=)  8=)  8=()  8=)  :=)  8=)  8=!  8=)  8=? 8=) 8=0


From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Fakeha Sehar
Sent: Thursday, November 5, 2015 3:00 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] LED lighting

I want to model LED lighting in eQuest. Any idea how?


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20151105/b0d46679/attachment-0002.htm>