[Equest-users] Sim file questions

[Sami, Vikram]

It worked without the asterisks in the eQUEST interface. I think you need to use the asterisks when you are working directly in the inp file

Vikram Sami
AIA, BEMP, LEED BD+C
Associate Partner



ZGF ARCHITECTS LLP
T 206.521.3509 E vikram.sami at zgf.com
925 Fourth Avenue, Suite 2400
Seattle, WA 98104


From: John Aulbach [mailto:jra_sac at yahoo.com]
Sent: Monday, May 11, 2015 11:27 AM
To: bfountain at greensim.com; Sami, Vikram
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Sim file questions

As I have done in Para metrics. I don't think I eve had to use quotation marks. Only if I did it in the .INP file. I use this to generate the 90, 180, and 270 Degree runs for LEED, and i don't believe i used quotations.

But tell us your experience, Vikram.


On Monday, May 11, 2015 11:20 AM, "bfountain at greensim.com<mailto:bfountain at greensim.com>" <bfountain at greensim.com<mailto:bfountain at greensim.com>> wrote:

I can answer the 2nd question:

Select the parametric component “Titles”, select the keyword e.g. LINE-3 and enter the value *ASHRAE 90.1 Ref Run*

It is important to put the title between asterisks.

As to the 1st question, I have not noticed that before.

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Sami, Vikram
Sent: May-11-15 2:03 PM
To: equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>
Subject: [Equest-users] Sim file questions

So I have a couple of questions regarding the images here:
SIM File
[cid:image001.png at 01D08BE1.EDCF9090]
INP File
[cid:image002.png at 01D08BE1.EDCF9090]

1.       I notice that sometimes in my SIM file (version 3.65) I am missing the titles in the BEPS, BEPU and some other reports for end use breakdowns (area highlighted in yellow)
2.       Also – Area highlighted in cyan – I want to know how I can change the title of the sim file PARAMETRICALLY. I am aware of how to do it in the inp file (highlighted above), but I am running a bunch of parametric simulations and would love to know how to do this as a parametric command. I’m hoping this is possible.

Thanks in advance!

-Vikram

Vikram Sami
AIA, BEMP, LEED BD+C
Associate Partner



ZGF ARCHITECTS LLP
T 206.521.3509 E vikram.sami at zgf.com<mailto:vikram.sami at zgf.com>
925 Fourth Avenue, Suite 2400
Seattle, WA 98104


ZGF Email Disclaimer<https://www.zgf.com/ZGF_Email_Disclaimer.html>



_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150511/5ff38e25/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 22044 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150511/5ff38e25/attachment-0010.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 12282 bytes
Desc: image002.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150511/5ff38e25/attachment-0011.png>