[Equest-users] External Glazing does not display in eQuest 3.64

[Sharad Kumar]

Dear Shilpa,

This may occur if your model is quite big or heavy.
It can be so as the building model is quite heavy so the eQUEST is sometime
incapable to let you view the glazing.
Sometimes its eQUEST's limitation.
So the remedy can be just try to have a right click aloof of the building
structure and click reset camera.
If this also does not help then try going to different tabs like internal
loads or air and water side tabs and return to building shell and repeat
reset camera.
Hope this may help.Just go in a hit and trial for views. If this does not
help then may be there can be other issues.


Thanks,
Sharad.Kumar
Green Horizon Consulting LLP
Gurgaon
India.


On Thu, Jun 11, 2015 at 3:51 AM, shilpa surana <surana.shilpa at gmail.com>
wrote:

> Fellow eQuest users,
>>
>> I am drawing external glazing in the wizard mode, however, when I exit
>> out of the wizard mode, the glazing does not show up. I can see the glazing
>> in the plan view, however, I cant get them to display in 3D View. I am
>> using eQuest 3.64. Has anyone faced similar issues?
>>
>> Best,
>> Shilpa Surana
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150612/078272c0/attachment-0005.htm>