[Equest-users] External Glazing does not display in eQuest 3.64

[GK Pandian]

Generally this issue will occur if you change the foot print area or
floor/ceiling heights and other parameter related to windows. Please ensure
that you are not changing any values once you customize the windows.

Thanks
Gopi

On Thu, Jun 11, 2015 at 3:51 AM, shilpa surana <surana.shilpa at gmail.com>
wrote:

> Fellow eQuest users,
>
> I am drawing external glazing in the wizard mode, however, when I exit out
> of the wizard mode, the glazing does not show up. I can see the glazing in
> the plan view, however, I cant get them to display in 3D View. I am using
> eQuest 3.64. Has anyone faced similar issues?
>
> Best,
>
> Shilpa Surana
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150611/decfb7f9/attachment-0005.htm>