[Equest-users] eQuest error

[Elizabeth Gillmor]

Can you run it before you take it out of wizard mode?  If so, what do the
simulation messages in the sim file say?

*Elizabeth Gillmor  PE, LC, LEED AP*

*e n e r g e t i c s  **consulting engineers, llc*
energetics-eng.com
c 303.619.0091

On Wed, Jun 10, 2015 at 6:38 AM, Pramod .D <d.pramod at setty.com> wrote:

>  Dear All,
>
>
>
> I have a problem creating system in eQuest. Whenever I tried to create
> system in the detail mode, eQuest hangs by itself and closes suddenly. Is
> anyone familiar with this problem. Please help me solve this problem.
>
>
>
> Thanks!
>
> Pramod
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150610/80556d99/attachment-0005.htm>