[Equest-users] eQuest error

Pramod .D d.pramod at setty.com
Wed Jun 10 08:52:21 PDT 2015


28 systems
________________________________
From: Sheila Sagerer<mailto:sheila at energyopportunities.com>
Sent: ‎10-‎06-‎15 ಅಪರಾಹ್ನ 08:36
To: Pramod .D<mailto:d.pramod at setty.com>; 'Brian Fountain'<mailto:bfountain at greensim.com>
Cc: 'eQUEST Users List'<mailto:equest-users at lists.onebuilding.org>
Subject: RE: [Equest-users] eQuest error

How many systems did you create yesterday?

Please note I have a new phone number.

Sheila Sagerer
Energy Engineer, EIT, LEED AP
Energy Opportunities, Inc, a 7group company
Phone: 717-341-1496
www.sevengroup.com<http://www.sevengroup.com/>

From: Pramod .D [mailto:d.pramod at setty.com]
Sent: Wednesday, June 10, 2015 11:01 AM
To: Sheila Sagerer; 'Brian Fountain'
Cc: 'eQUEST Users List'
Subject: RE: [Equest-users] eQuest error

I created a psz system with heat pump. I created most of the systems yesterday. Today when I tried to create another one, software hangs and closes immediately.
________________________________
From: Sheila Sagerer<mailto:sheila at energyopportunities.com>
Sent: ‎10-‎06-‎15 ಅಪರಾಹ್ನ 07:08
To: 'Brian Fountain'<mailto:bfountain at greensim.com>; Pramod .D<mailto:d.pramod at setty.com>
Cc: 'eQUEST Users List'<mailto:equest-users at lists.onebuilding.org>
Subject: RE: [Equest-users] eQuest error
Good morning,

The first questions I would ask are:

1. What (if any) Plant components are in the model from the Wizard mode?
2. What (if any) Air-side System components are in the model from the Wizard mode?
3. What system are you trying to create in Detailed mode that causes the lockup?
4. Did you delete any Plant or Air-Side systems or system components that were initially created in the Wizard mode prior to attempting to create the new system?

Sheila Sagerer
Energy Engineer, EIT, LEED AP
Energy Opportunities, Inc, a 7group company
Phone: 717-341-1496
www.sevengroup.com<http://www.sevengroup.com/>

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Brian Fountain
Sent: Wednesday, June 10, 2015 9:26 AM
To: Pramod .D
Cc: eQUEST Users List
Subject: Re: [Equest-users] eQuest error

So much for the easy solution.

My other easy suggestions are to open the. Inp rather than the. pd2 and to check the. BDL file for errors. Beyond that, you will have to share your. inp and. pd2 with the group and someone may take a look and find something.

From: Pramod .D
Sent: Wednesday, June 10, 2015 9:13 AM
To: Brian Fountain; equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>
Subject: RE: [Equest-users] eQuest error


Sorry, It’s not working.

From: Brian Fountain [mailto:bfountain at greensim.com]
Sent: Wednesday, June 10, 2015 6:13 PM
To: Pramod .D; equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>
Subject: Re: [Equest-users] eQuest error

One suggestion: I have seen cases where the .pdl file gets very large which seems to cause problems. If so, just delete it then reopen the eQUEST file.‎ The. pdl is just a log of file openings and sims.


From: Pramod .D
Sent: Wednesday, June 10, 2015 8:39 AM
To: equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>
Subject: [Equest-users] eQuest error


Dear All,

I have a problem creating system in eQuest. Whenever I tried to create system in the detail mode, eQuest hangs by itself and closes suddenly. Is anyone familiar with this problem. Please help me solve this problem.

Thanks!
Pramod



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150610/5e4881ab/attachment-0005.htm>


More information about the Equest-users mailing list