[Equest-users] Shell with only part of the roof exposed

[Steven Savich, LEED AP]

Jeff,

Still the same for 3-65.

Best and fastest way to change from external to internal surface type is still with a text editor working directly in the .inp file.

Steven Savich, CPD, LEED AP
Senior Mechanical Designer, Energy Analyst

[Description: cid:image003.jpg at 01CE44D4.DD6A74A0]Systems West Engineers

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Jeff Ross-Bain
Sent: Tuesday, July 07, 2015 2:32 PM
To: 'equest'
Subject: [Equest-users] Shell with only part of the roof exposed

Hi Equest Experts:

As I recall from before, even if a roof has another shell immediately above and touching, the lower (covered) roof was still regarded as exterior and exposed to the elements. Is that still the same with v3-65?

It would be great to be able to change a roof property from an external construction type to an adiabatic surface? I cannot figure that one out. Any thoughts?

Thanks!

Jeff Ross-Bain, PE, LEED Fellow
Principal
404-220-8940 Office
404-220-8955 Direct
www.rbgb.com<http://www.rbgb.com/>

Build Green. Save Time.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150707/5f29afda/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 998 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150707/5f29afda/attachment-0005.jpg>