[Equest-users] Deleting a Chiller From a Chilled Water Loop

[Jill Moreland]

Thanks Daric,

I closed the file and reopened and saw the 99 space errors you mentioned.
Interesting thing is I was able to run a report with these errors prior to
deleting the chillers. Go figure. Anyways, I will fix the names and see if
that helps. Yup, big file/project and it's my first time using eQuest. Fun
times.


Jill Moreland
Connect Program Manager
Plug Smart
Jill.Moreland at PlugSmart.com
Cell: 239-233-0993
Fax: 800-518-5576


Plug Smart is accepting new clients, the best praise you could give us a
recommendation to a potential new client. Everyone needs to save money,
Plug Smart can make it happen.

Confidential:

This e-mail and any files transmitted with it are the property of Juice
Technologies, LLC. and/or its affiliates, are confidential, and are
intended solely for the use of the individual or entity to whom this e-mail
is addressed. If you are not one of the named recipients or otherwise have
reason to believe that you have received this e-mail in error, please
notify the sender and delete this message immediately from your computer.
Any other use, retention, dissemination, forwarding, printing or copying of
this e-mail is strictly prohibited.

On Wed, Aug 12, 2015 at 4:09 PM, Daric Adair <Daric.Adair at hei-eng.com>
wrote:

> Jill;
>
> This is a BIG model – dang.
>
>
>
> I was able to download and open the model – but I had numerous errors due
> to Spaces having the same name [re: 10+ ‘STAIRWAY’ and ‘MECHANICAL ROOM’].
> These spaces should be renamed, even its to add a direction [N/S/E/W] or a
> number to the end to differentiate them. This has caused me issues in the
> past when I get two Spaces with the same name. This also cascades into
> issues with the assigned Thermal Zone since it has no way differentiate
> between this ‘Stairway’ or that ‘Stairway’.
>
>
>
> I’d say step 1 is to correct the above, and then reload the model. This
> could be the issue.
>
>
>
> An additional area to look at is the ‘Read.log’ file. This file is created
> when the model is loaded, and by searching for ‘Error’ in this text file,
> you can quickly skip to the issues in the .inp file. I’ve found it more
> useful at times than the ‘BDL Error Manager’ interface with eQuest.
>
>
>
> On the Chiller issue, my read.log file didn’t show these at all. But it
> could have been ‘choked off’ but the errors above.
>
>
>
> Let us know what you find.
>
>
>
>
>
> Thanks,
>
> DARIC R. ADAIR  PE, C.E.M.
> *Henderson Engineers, Inc. | *Mechanical Engineer, Energy Analyst
> *dir* 913 742 5530 *tel* 913 742 5000 *fax* 913 742 5001 *tx id*
> #F-001236 *email* daric.adair at hei-eng.com *www.hei-eng.com*
> <http://www.hei-eng.com/>
> Licensed in KS.
>
>
>
> *From:* Jill Moreland [mailto:jill.moreland at plugsmart.com]
> *Sent:* Wednesday, August 12, 2015 2:35 PM
> *To:* Equest Users Mailing List <Equest-users at lists.onebuilding.org>
> *Subject:* [Equest-users] Deleting a Chiller From a Chilled Water Loop
>
>
>
> Good Afternoon,
>
>
>
> I am trying to generate the savings of changing out the pumps in the
> cooling tower and chiller of the hospital I am modeling. I am out of the
> wizard and in detail mode and noticed that four chillers (1a, 1b, 2a, 2b)
> were showing up in the component tree instead of just the actual two. I had
> no errors in my file and right clicked on chiller 1b & 2b and hit delete.
> The warning did say there was a child component but I believe that was the
> pump associated with it and hit delete.
>
>
>
> Now when I try to run simulation I get "1 Run(s) Terminated Due to Errors"
> and can not view the summary report. When I left click the "Check Building
> Description" box it says there are no BDL errors. Not sure how to resolve.
> I have a saved file with the chillers before they were deleted but have
> attached the file with 1b and 2b deleted that I am having problems with and
> would greatly appreciate any help. Thanks!
>
>
>
> Jill Moreland
>
> Connect Program Manager
>
> Plug Smart
>
> Jill.Moreland at PlugSmart.com
>
> Cell: 239-233-0993
>
> Fax: 800-518-5576
>
>
>
> [image: Image removed by sender.]
>
>
>
> Plug Smart is accepting new clients, the best praise you could give us a
> recommendation to a potential new client. Everyone needs to save money,
> Plug Smart can make it happen.
>
> Confidential:
>
> This e-mail and any files transmitted with it are the property of Juice
> Technologies, LLC. and/or its affiliates, are confidential, and are
> intended solely for the use of the individual or entity to whom this e-mail
> is addressed. If you are not one of the named recipients or otherwise have
> reason to believe that you have received this e-mail in error, please
> notify the sender and delete this message immediately from your computer.
> Any other use, retention, dissemination, forwarding, printing or copying of
> this e-mail is strictly prohibited.
>
> AT:2|
>
> ------------------------------
>
> This email and any files transmitted with it are confidential and are
> intended solely for the use of the individual or entity to whom they are
> addressed. This communication represents the originator's personal views
> and opinions, which do not necessarily reflect those of Henderson
> Engineers, Inc. If you are not the original recipient or the person
> responsible for delivering the email to the intended recipient, be advised
> that you have received this email in error, and that any use,
> dissemination, forwarding, printing, or copying of this email is strictly
> prohibited. If you received this email in error, please immediately notify
> administrator at hei-eng.com.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150812/7859ad1e/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ~WRD000.jpg
Type: image/jpeg
Size: 823 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150812/7859ad1e/attachment-0005.jpg>