[Equest-users] forrtl error in all projects

Thu Apr 23 06:17:23 PDT 2015

Hi Chris,
No, it did not.  I switched them out, and even reinstalled the entire program. 
Switching the compatibility mode worked. 

Joe Fleming,  PE, LEED BD+C, BEMP
joe at thespinnakergroupinc.com 
561-602-3132

-------- Original message --------
From: "Jones, Christopher" <cjones at halsall.com> 
Date:04/23/2015  8:07 AM  (GMT-05:00) 
To: Joe Fleming <joe at thespinnakergroupinc.com> 
Cc: equest-users at lists.onebuilding.org 
Subject: RE: [Equest-users] forrtl error in all projects 

Hello Joe,
Did the error stop when you reverted to the original bdllib.dat?  I find editing bdllib.cat tricky, the file format is very rigid.

Christopher Jones, P.Eng. 
Tel: 416.644.4226 • Toll Free: 1.888.425.7255 x 527

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Joe Fleming
Sent: Wednesday, April 22, 2015 6:23 PM
To: 'Julien Marrec'; 'Chen Zhong'
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] forrtl error in all projects

Thank you Julien and Chen.
I received a similar solution from Tim Elley.  In my case, running in Windows 7 compatibility mode seems to have fixed the problem. 
I was worried all of the .inp files had become corrupted!
(The error started after changing the bdllib.dat file around)

Joe Fleming |  PE, LEED AP BD+C, BEMP
Commissioning Agent & Energy Consultant | The Spinnaker Group
joe at thespinnakergroupinc.com
Cell  561-602-3132  |  Office  754-800-3100

From: Julien Marrec [mailto:julien.marrec at gmail.com] 
Sent: Wednesday, April 22, 2015 4:57 PM
To: Chen Zhong
Cc: Joe Fleming; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] forrtl error in all projects

I get it once in a while. Rebooting the computer does it.
Also run equest as administrator and in XP compatibility mode... That seems to have limited the frequency of this error.

Don't give up,
Cheers,
Julien 

Envoyé de mon iPhone

Le 22 avr. 2015 à 22:42, Chen Zhong <chzhwork at gmail.com> a écrit :

Hi Joe, 

I ran into the same issue today. But the model could be run on other's computer. Maybe you can give it a shot. Also, in my case, reinstalling equest could fix the problem.

Good luck,

Zhong Chen

2015-04-22 15:26 GMT-04:00 Joe Fleming <joe at thespinnakergroupinc.com>:
Does anyone out there know how to get past this error:
“Forrtl: info (58): format syntax error at or near (Note: u-values include outside air film)'//73X, ‘LOCATION OF ORIGIN'/51X, 'GL”

It is showing up in all projects.  I tried reinstalling equest 3-65 and no luck.  Every equest project on my computer gives this error now!
I think I may throw up.

Joe Fleming |  PE, LEED AP BD+C, BEMP
Commissioning Agent & Energy Consultant | The Spinnaker Group
joe at thespinnakergroupinc.com
Cell  561-602-3132  |  Office  754-800-3100

Please note our new address: 3236 Huntington  |  Weston, FL 33332

<image001.jpg><image002.jpg><image003.jpg>             <image004.jpg>
2013 Winner - South Florida Business Journal "Business of the Year" Award

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

______________________________________________________________________
NOTICE: This communication and any attachments ("this message") may contain confidential information for the sole use of the intended recipient(s). Any unauthorized use, disclosure, viewing, copying, alteration, dissemination or distribution of, or reliance on this message is strictly prohibited. If you have received this message in error, or you are not an authorized recipient, please notify the sender immediately by replying to this message, delete this message and all copies from your e-mail system and destroy any printed copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150423/0cb4d0b4/attachment-0005.htm>