[Equest-users] FW: Dry Cooler & performance curve

[Laura Howe, RCE]

Hi All-

 

I have a project which has a small chiller which also has a dry cooler.  The
dry cooler has only the circulation pump, then two variable speed fans which
modulate to maintain return water temp.  Initially I figured out how to add
a second chiller to the loop, and make it run only below the designated OAT
using  Equipment Controls and Load management I seem to see the savings
(using a default EIR of nearly zero for testing purposes) .  I am hopeful
that I can then create a custom performance curve for this dry cooler,
basing the energy consumption on load and OAT.  Alternately if that is too
complicated, I think OAT would be a reasonable backup plan.  

 

Does anyone have any guidance on creating such a performance curve in this
situation?

 

Thanks

Laura

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150410/1a9a53e0/attachment-0005.htm>