[Equest-users] residential equipment power density

[Javed Iqbal]

You may refer ASHRAE Manual and Fundamentals to get the optimum values.

Thanks!

On Tue, May 8, 2012 at 4:51 PM, tiejun hu <hutiejun1223 at 126.com> wrote:

> Hi:
>     everone, I'm modeling a resident LEED project, which is my first
> resident model, because i have no date about room equipment, can i use
> defaut date in equest? and is it accepted by USGBC? if not, how shoud i
> input these date? any help will be appriated!
>    BEST REGARDS
>
> tiejun
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 


Javed Iqbal, LEED AP, CEA
Energy Analyst
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120508/06abaa4e/attachment.htm>