[Equest-users] Values choosing of the typical equipment & miscellaneous power densities.
Jiao, Joey
Joey.Jiao at WSPGroup.com.cn
Wed Sep 28 02:59:13 PDT 2011
Hi, Everyone:
I'm confused with the value choosing for the equipment & miscellaneous
power densities like the illustrate below.
The table G 3.1 no.12 said it should be based on the building and space
type, but there isn't other information. So do we need to add this load
part when we make a baseline model?
Maybe this isn't very important , but I want to make sure about it.
I know we can choosing the lighting power densities in Section 9, but I
can't find the table for other equipment. So what should you do?
By the way , about the occupancy density and ventilation inputs shown
below, I found the reference information from ASHRAE 62.1, is that a
common way when we make a baseline?
Thank you for your kindly help.
Best wishes.
Joey
------------------------------------------------------------------------
---
Joey Jiao
Graduate Engineer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110928/4c95f020/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 24838 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110928/4c95f020/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 29593 bytes
Desc: image002.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110928/4c95f020/attachment-0001.png>
More information about the Equest-users
mailing list