[Equest-users] modeling building with different types of roofs

McArdle, Christopher cmcardle at ewingcole.com
Wed Sep 21 04:59:26 PDT 2011


The building I and working on has two different types of roof.  Flat and pitched and there are two different pitched roofs at different elevations.  Did I read the instructions correctly that I need to make three building shells in order to input the three different roofs?  Basically spitting my one building into three buildings.




Christopher  McArdle, PE, LEED AP, CEM

EwingCole

Federal Reserve Bank Building
100 N. 6th Street
Philadelphia, PA 19106-1590

DIRECT  215.625.4432
TEL  215.923.2020
FAX 215.574.9163
EMAIL cmcardle at ewingcole.com

ewingcole.com<http://www.ewingcole.com>


[cid:d46a1c.png at 8d169f45.48bdeee5]

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110921/08a3c6f4/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: d46a1c.png
Type: image/png
Size: 6555 bytes
Desc: d46a1c.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110921/08a3c6f4/attachment.png>


More information about the Equest-users mailing list