[Equest-users] LEED Energy modeling add a new space in Detail Mode

John Aulbach jra_sac at yahoo.com
Tue Sep 20 09:05:16 PDT 2011


Alvaro:
 
Simpliest way I found is actually create the added space (providing you are not altering the other spaces) in the Wizard Mode, then cutting and pasting the appropriate geomtery (including the Polygon info) into the Detail Edit .inp. Saves a lot of grief, in my opinion.
 John R. Aulbach, PE, CEM
Senior Energy Engineer

________________________________

PartnerEnergy
1990 E. Grand Avenue, El Segundo, CA 90245
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
www.ptrenergy.com| jaulbach at ptrenergy.com
 

From: "Gonzalez, Alvaro" <alvaro.gonzalez at tlc-eng.com>
To: "equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org>
Sent: Tuesday, September 20, 2011 8:42 AM
Subject: [Equest-users] LEED Energy modeling add a new space in Detail Mode


Hello,
 
Anybody knows how to add a new space to the building model once you are in  Detailed Data Mode without having to come back to Wizard Data Mode and lose part of your work.
Any help is greatly appreciated. 
Thanks,
 
 
 
 
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110920/eebc18c4/attachment.htm>


More information about the Equest-users mailing list