[Equest-users] Materials for baseline design

Daniel Knapp danielk at arborus.ca
Tue Sep 20 06:31:06 PDT 2011


The Rocky Mountain Institute has a lovely set of modelling tools for eQuest, and they include a text file with ASHRAE baseline constructions that can be copied and pasted into your .inp file.  Their file also includes reset schedules for the CHW and HW loops and some other useful tidbits.  

The link is:  http://www.rmi.org/rmi/ModelingTools

All the best,
Dan

—
Daniel Knapp, PhD, LEED® AP O+M
danielk at arborus.ca

Arborus Consulting
Energy Strategies for the Built Environment
www.arborus.ca
76 Chamberlain Avenue 
Ottawa, ON, K1S 1V9 
Phone: (613) 234-7178 ext. 113
Fax: (613) 234-0740



On 2011-09-20, at 12:29 AM, Jiao, Joey wrote:

> Kelsey VanTassel KVanTassel at sustaineng.com 
> Tue Mar 1 06:49:26 PST 2011
> Previous message: [Equest-users] Materials for baseline design
> Next message: [Equest-users] Materials for baseline design
> Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
> You can create custom constructions with the following layers. You will need to adjust the thickness of the insulation layers slightly to achieve the exact U-factor (inverse of overall R-value), but here is a good starting point:
>  
> Roof (see A2.2.1): Built-up roofing, Polystyrene 4 in (R-5/in)
> Walls (see A3.3.1): 1" Stucco, 2 in Polystyrene, create a material based on resistance with a R-value of 6.0 to represent the effective R-value of the steel studs plus batt insulation (Table A3.3), 5/8 in gypsum wall board.
>  
> Kelsey Van Tassel
> Mechanical Engineer | kvantassel at sustaineng.com<mailto:kvantassel at sustaineng.com>
> 608.836.4488 ext. 20 | Fax: 608.836.4477
>  
> Sustainable Engineering Group
> 901 Deming Way, Suite 201
> Madison, WI 53717
> www.sustaineng.com<http://www.sustaineng.com/>
>  
>  
> From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Loukiashenko Kseniya
> Sent: Tuesday, March 01, 2011 4:08 AM
> To: equest-users at lists.onebuilding.org
> Subject: [Equest-users] Materials for baseline design
>  
>  
> Hello all,
>  
> We are using eQuest for LEED and we are to create a baseline design of our building. Characteristics for baseline construction materials (walls,roof,floor, etc) must be equal to ASHRAE 90.1 (for our zone it is table 5.5-6, p.24) data:
>  
> Roof - Insulation entirely above deck - U-0.048 / R-20.0 c.i.
> Walls - Steel framed - U-0.064 / R-13.0+R-7.5c.i.
> Slab-on-grade floors - unheated - F-0.540 / R-10 for 24 in.
>  
> Can anyone help to choose appropriate consructions/materials from eQuest screen?
> We are not sure what to choose as we are located in Europe and use another parametrs and names.
>  
> Thank you!
>  
>  
> Kseniya L.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110301/ca3e1d33/attachment.htm>
>  
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110920/5f71d6dc/attachment.htm>


More information about the Equest-users mailing list