[Equest-users] 2 standard file writing errors encountered

[Paul Diglio]

Ramesh:

Your 3-D building view is all distorted.  I returned to Wizard Mode and saw that 
all three floors are unconditioned on screen 13.  I assigned HVAC system 1 to 
all three floors.  HVAC system 1 was defined with no heating or cooling, so I 
defined it as a heat pump.  Then the simulation works ok.

Some of your custom zones in the Wizard screen 2 are not square.  Look at the 
vertices X-Y coordinates when you select a zone and you will see some of the 
numbers are off.  You can type in the X-Y coordinates directly in the left hand 
column instead of trying to straighten them out with the mouse.

Paul Diglio





________________________________
From: ramesh buddhi <ramesh at greenevolution.in>
To: eQuest Users <equest-users at lists.onebuilding.org>
Sent: Tue, September 20, 2011 7:37:27 AM
Subject: [Equest-users] 2 standard file writing errors encountered


Hi Folks

I am getting (2standard file writing errors encountered) error while running my 
simulation can any one help me out to resolve this issue. Please find the 
attachments.

Thanks in advance
Ramesh BR 


  New No.110 / Survey No. 151/1, Mahatma Gandhi Road 
  Thiruvanmiyur, Chennai 600041 INDIA
  Web: www.greenevolution.in
  Land: +91-44-4201-8369
  Cell : +91-99406-19915
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110920/855117d9/attachment.htm>