[Equest-users] No heat load on fan-coil units

Sheldon Mendonca sheldon at dsmea.com
Thu Sep 15 19:49:40 PDT 2011


Hi eQuest users,

I am trying to model a 6 story nursing-home building with fan-coil units 
in the resedintial areas... Floors 2-6. For some reason I have no heat 
load on the units. I have the same problem for some zones supplied by 
the Air-handling units. Cannot seem to figure out why..

I have put a lot of time in this model and it would be great if anyone 
can suggest solutions... I have attached the model for your use

Thanks a ton...
Sheldon

-- 
Energy Engineer/Analyst
DSM Engineering Associates

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: GHNH equest.inp
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110915/90154c2f/attachment.txt>


More information about the Equest-users mailing list