[Equest-users] Wizard BDL Error When Defining Custom Zones

Paul Diglio paul.diglio at sbcglobal.net
Tue Sep 13 10:10:59 PDT 2011


Patrick:

Thank you for your efforts.  No, I don't have a zone group without a zone 
attached to it.  Kindly check the attached files to see if I missed something.

Pasha:

Attached is the project rev1 and rev2 files.  Rev1 is fine with one zone added 
on the first floor main shell.  Rev2 is with a second zone added to the first 
floor main shell and is where I am encountering the problems.

Thank you so much for checking this out for me.

Paul Diglio




________________________________
From: Pasha Korber-Gonzalez <pasha.pkconsulting at gmail.com>
To: "Patrick J. O'Leary, Jr." <poleary1969 at gmail.com>
Cc: Paul Diglio <paul.diglio at sbcglobal.net>; equest-users 
<equest-users at lists.onebuilding.org>
Sent: Tue, September 13, 2011 12:50:34 PM
Subject: Re: [Equest-users] Wizard BDL Error When Defining Custom Zones


Paul---how about attaching your .pd2, .inp, and dwg file and see if we get the 
same error on our computer....
 
My guess is that it is a shell error, or some corruption in your whole 
file....you might have to start a new file.
 
I'm happy to try and recreate the error on my computer.
 
Pasha 


On Tue, Sep 13, 2011 at 10:07 AM, Patrick J. O'Leary, Jr. 
<poleary1969 at gmail.com> wrote:

 
>looking at screen 14, do you have a zone group defined without a zone assigned 
>to it?  this would be the same as having an empty zone in detailed mode (i.e. no 
>space assigned to a zone).  detailed mode requiring the space (your initial 
>customing zoning) assigned to a zone (the zone group wizard screen 14) assigned 
>to an hvac unit of some type. 
>
>
>
>On 9/13/11 8:41 AM, Paul Diglio wrote: 
>Patrick:
>>
>>
>>The HVAC unit is assigned for each zone I enter.   Initially, I had one zone per 
>>floor.  When I started to add custom zones I made sure that each zone on screen 
>>14 of the shell create/modify wizard is assigned to the hvac system.
>>
>>I am unsure of what the error message means so I am having difficulty correcting 
>>it.   I even tried to create custom zones on the second floor of this building 
>>and I get the same error, but I was able to create custom zones in the basement 
>>of this building without any errors.
>>
>>Sincerely,
>>
>>Paul Diglio
>>
>>

>_______________________________________________
>Equest-users mailing list
>http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>To unsubscribe from this mailing list send  a blank message to 
>EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110913/a84f6d0f/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Maplewood BW 9-13-11 Rev1.pd2
Type: application/octet-stream
Size: 193995 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110913/a84f6d0f/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Maplewood BW 9-13-11 Rev1.inp
Type: application/octet-stream
Size: 201788 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110913/a84f6d0f/attachment-0001.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Maplewood BW 9-13-11 Rev2.pd2
Type: application/octet-stream
Size: 194253 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110913/a84f6d0f/attachment-0002.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Maplewood BW 9-13-11 Rev2.inp
Type: application/octet-stream
Size: 561 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110913/a84f6d0f/attachment-0003.obj>


More information about the Equest-users mailing list