[Equest-users] Wizard BDL Error When Defining Custom Zones

[Patrick J. O'Leary, Jr.]

looking back at the error message it is indicating that there base cause 
is there is missing space data, so the zone the space should be assigned 
to generates an error, and the hvac unit the zone is assigned to 
generates an error.

so ... even if you create one space does the .inp file reflect the input 
properly?  i.e. one space, assigned to one zone, assigned to one hvac unit?

or is your space or zone name too long?  perhaps greater than 32 characters?

On 9/13/11 8:41 AM, Paul Diglio wrote:
> Patrick:
>
> The HVAC unit is assigned for each zone I enter.   Initially, I had 
> one zone per floor.  When I started to add custom zones I made sure 
> that each zone on screen 14 of the shell create/modify wizard is 
> assigned to the hvac system.
>
> I am unsure of what the error message means so I am having difficulty 
> correcting it.   I even tried to create custom zones on the second 
> floor of this building and I get the same error, but I was able to 
> create custom zones in the basement of this building without any errors.
>
> Sincerely,
>
> Paul Diglio
>
> ------------------------------------------------------------------------
> *From:* "Patrick J. O'Leary, Jr." <poleary1969 at gmail.com>
> *To:* equest-users <equest-users at lists.onebuilding.org>
> *Sent:* Tue, September 13, 2011 11:36:31 AM
> *Subject:* Re: [Equest-users] Wizard BDL Error When Defining Custom Zones
>
> is there an hvac unit already created without assignments?  or 
> assigned per floor so if the floor zoning isn't done the error is 
> returned?
>
> On 9/13/11 8:25 AM, Paul Diglio wrote:
>> Patrick:
>>
>> Yes I am closing out before finishing the zoning but I have done so 
>> successfully on other models and the basement level of this model.
>>
>> I even tried defining several large zones in this model on the floor 
>> that is causing me problems and I still get the errors.  I do not get 
>> errors if I choose one zone per floor.
>>
>> Thanks for your response,
>>
>> Paul Diglio
>>
>> ------------------------------------------------------------------------
>> *From:* "Patrick J. O'Leary, Jr." <poleary1969 at gmail.com>
>> *To:* equest-users at lists.onebuilding.org
>> *Sent:* Tue, September 13, 2011 10:37:23 AM
>> *Subject:* Re: [Equest-users] Wizard BDL Error When Defining Custom Zones
>>
>> looks like you're closing out of equest/wizard without finishing your 
>> zoning?  so equest does a check on the entire model & finds zones 
>> without hvac assignments & returns the error.
>>
>> On 9/13/11 5:39 AM, Paul Diglio wrote:
>>> Dear eQuesters:
>>>
>>> I am having a problem defining custom zones in the DD Wizard.
>>>
>>> I can add one zone no problem.  Please see attached maplewood zone 1.jpg
>>>
>>> When I try to add the second zone (maplewood zone 2.jpg)  I get the 
>>> three zone error messages.jpg attached.
>>>
>>> I typically add zones in this manner and have not had a problem 
>>> before.  Any ideas?
>>>
>>> Thank you,
>>>
>>> Paul Diglio
>>>
>>>
>>> _______________________________________________
>>> Equest-users mailing list
>>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>>> To unsubscribe from this mailing list send  a blank message toEQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>>    
>>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110913/9d645804/attachment.htm>