[Equest-users] error in deleting chilled water loop pump
Bobby Sy
rsg4999 at gmail.com
Thu Sep 8 03:45:23 PDT 2011
dear all,
I'm working on project with district cooling, following the guidelines of
"Treatment of District or Campus Thermal Energy in LEED V2 and LEED 2009 -
Design Construction", I took the option 1 (Building Stand Alone Scenario).
After adding Chilled water meter, I deleted the whole plant (chiller,
condenser pump, & cooling tower) but I got this error:
***ERROR***********************************************************************
Loop: Chilled Water Loop does not have any pumps
directly attached, nor do the primary equipment
units. You must define a pump.
In the actual design all pumps are located in the plant. The building will
not have circulating pump that's why I tried to detlete it. Is there a way
to delete the pump without any error?
If it's not allowed to delete the pump, should it still comply with ASHRAE
90.1 (22 W/gpm)?
thanks in advance.
Bob
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110908/9d49ecd8/attachment.htm>
More information about the Equest-users
mailing list