[Equest-users] Instantaneous DHW heaters
John Aulbach
jra_sac at yahoo.com
Tue Sep 6 12:18:26 PDT 2011
Hi Team:
Hope everyone had a nice holiday.
I am doing an office building in eQuest with 7 EEMs. I am currently in the Detailed Edit mode. I have an electric hot water heater with about a 400 gallon tank. I set the tank gallons in the EEM to 2 (as eQuest doesn't like Zero). I ran the run and I get no savings.
I tried an test example in the Schematic Wizard using the Basic Office bldg presented. I used a storage type system for the Base (with about a 75 gallon tank) and an Instantaneous system (which is not a choice in the Detailed Edit mode) and a 2 gallon tank. I got about a 10% improvement in DHW energy.
Can anyone suggest what I might be missing in the large office mode?
John R. Aulbach, PE, CEM
Senior Energy Engineer
________________________________
PartnerEnergy
1990 E. Grand Avenue, El Segundo, CA 90245
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
www.ptrenergy.com| jaulbach at ptrenergy.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110906/96d4ac38/attachment.htm>
More information about the Equest-users
mailing list