[Equest-users] Air Flows: minimum design flow

[xiaoyang shi]

Hi folks,

Could I ask how to set the "Air Flows: Minimum Design Flow" on the "HVAC
Zones: Temperatures and Air Flows" panel? Does ASHARE have this standard?

The Default Minimum Design Flow Value is 0.5 cfm/ft2.  Maybe the value is
too high for some instances.

If I set the minimum design flow value is 0.05 cfm/ft2. The output Design
flow maybe 0.33cfm/ft2. Then, if I keep on decreasing the value from 0.05
cfm/ft2 to lower values, the output won't change.

So, how can we set Minimum Design Flow value?

Thank you very much.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110309/c6dfdf29/attachment.htm>