[Equest-users] [Bldg-sim] supply air rate

[David Eldridge]

“ASHRAE Pocket Guide” is handy, page 166 and 167.  Put a sticky note on that
page for sure!



Most of the items in the Pocket Guide can be found somewhere in the
handbooks as well, although I’m not exactly sure where this information
would be.



David



*
*



*David S. Eldridge, Jr.**, P**.**E**.**, LEED AP BD+C, BEMP, HBDP*

Project Manager



Direct: (847) 316-9224 | Fax: (847) 328-4550



*Grumman/Butkus Associates* | 820 Davis Street, Suite 300 | Evanston, IL
60201

http://www.grummanbutkus.com



Energy Efficiency Consultants and Sustainable Design Engineers

*
*

* *



*From:* equest-users-bounces at lists.onebuilding.org [mailto:
equest-users-bounces at lists.onebuilding.org] *On Behalf Of *Carol Gardner
*Sent:* Thursday, March 03, 2011 9:54 AM
*To:* sambhav tiwari
*Cc:* eQUEST Users List
*Subject:* Re: [Equest-users] [Bldg-sim] supply air rate



Sambhav,

There is a range of cfm/sf depending on type of space, etc. A really good
resource for them is a little book that ASHRAE publishes that has all kinds
of "rules of thumb" in it, although I just looked for it in their
publication catalog and didn't see it,

Anyway, it depends of type of space, space usage, whether it is an interior
or exterior space, etc., and seems to hover around 1 cfm/ft. It has always
made me wonder why the eQUEST default is 0.5 cfm/sf, because that number in
almost all cases will be too small. Since we're dealing with Q = 1.08 cfm
delta T a lot in our annual energy calculations this points to a high
probability that the hours of cooling/heating will be outside of their
throttling range. I almost always raise the cfm/sf right away when I start a
model.

Hope this helps,

Carol

On Thu, Mar 3, 2011 at 4:18 AM, sambhav tiwari <tiwari.sambhav at gmail.com>
wrote:

Hi All,
          What is the range for supply air cfm/sqft  for conditioned spaces
Thanks
Sambhav.
_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG




-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110303/b1e8a1a2/attachment.htm>