[Equest-users] G3.1.3.12 Supply Air Temperature Reset

[Jenny Zhang]

Hi Omer,
you can find reset option in the airside system screen(COOLING).
my approach is to choose reset>warmest>airflow first.(For VAV system I think the airflow will reduce first to satisfy load then the supply air temperature could rise at the minimum air flow rate.) 
the dealt t for reset is according to ASHRAE 90.1.

Regards
Jenny Z



-----Original Message-----
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of ?mer Moltay
Sent: 2011年1月20日 23:54
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] G3.1.3.12 Supply Air Temperature Reset

Dear All,

In eQuest, how can the air temperature for cooling in a VAV system be 
reset as required by G3.1.3.12?

Thank you,

Omer Moltay, LEED AP
Mimta Ltd.


-----
Bu iletide virüs bulunmadı.
AVG tarafından kontrol edildi - www.avg.com
Sürüm: 10.0.1191 / Virüs Veritabanı: 1435/3391 - Sürüm Tarihi: 19.01.2011

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
____________________________________________________________
Electronic mail messages entering and leaving Arup  business
systems are scanned for acceptability of content and viruses