[Equest-users] Cooling energy source for natural gas
Fleming, Joe
joe.fleming at tlc-eng.com
Tue Feb 22 07:02:23 PST 2011
Select an absorption chiller and assign it to a hot water boiler. Your natural gas energy will be assigned to the hot water boiler. The cooling from the absorption chiller will be driven by the hot water which is fueled by natural gas. So, in essence your cooling is natural gas fueled.
Joe Fleming
E.I., LEED AP BD+C, BEMP
Mechanical Engineer II
TLC Engineering for Architecture
Your 2030 Challenge Partner
800 Fairway Drive, Suite 250
Deerfield Beach, FL 33441-1816
phone:
954-418-9096
fax:
954-418-9296
direct:
954-418-4591
website:
www.tlc-engineers.com
-----Original Message-----
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Seongwon.Seo at csiro.au
Sent: Tuesday, February 22, 2011 2:35 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Cooling energy source for natural gas
Hi,
I couldn't find any options for different cooling energy source such as natural gas.
For my example building to apply eQUEST, the cooling is provided from a single ammonia absorption heat pump/chiller using natural gas to directly fire the ammonia absorption cycle and an air cooled condenser.
For that, I want to select natural gas as cooling energy source, but there isn't.
Any advise or comments are welcome.
Regards, Seongwon (Sam)
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
More information about the Equest-users
mailing list