[Equest-users] LEED Online Form - Number of Heating / Cooling Hours Not Met

[Jenny Zhang]

Omer,
you could use 3.64 to open your model and simulate it again. The newest version of equest contain unmet load hours of heating or cooling in BEPU/BEPS report.

-----Original Message-----
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of ?mer Moltay
Sent: 2011年2月11日 21:19
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] LEED Online Form - Number of Heating / Cooling Hours Not Met

Dear All,

LEED online form requests unmet hours for heating and cooling to be 
entered separately.

1. Is it possible to extract this information from any of eQuest reports?
2. Isn't this counterintuitive? There will be overlapping hours for both 
heating and cooling. The form adds these hours (double counting any hour 
where there is both a heating load unmet and cooling load unmet) and 
requires the addition to be smaller than 300. As far as I know, the 
combined number of hours need to be smaller than 300.

Thanks for any replies,

Omer Moltay, LEED AP
Mimta


-----
Bu iletide virüs bulunmadı.
AVG tarafından kontrol edildi - www.avg.com
Sürüm: 10.0.1204 / Virüs Veritabanı: 1435/3436 - Sürüm Tarihi: 11.02.2011

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
____________________________________________________________
Electronic mail messages entering and leaving Arup  business
systems are scanned for acceptability of content and viruses