[Equest-users] Modelling Floors with Different Interior Configurations

[Ömer Moltay]

Dear All,

We are encountering this problem all too often and would like to know if 
anybody has a satisfactory solution. For example, in a two storey 
building, the interior space configurations in each floor are 
considerably different, forcing us to create two separate shells that 
sit on top of each other in eQuest schematic wizard. However, when this 
is the case, eQuest treats each shell as a separate building and place 
exterior surfaces (ie. Roofs) between floors (instead of ceilings). The 
times it takes to manually convert these into interior surfaces with the 
right intra-space relationships is way out of reasonable limits.

Is there a way to create a shell with floors that each have different 
interior layouts (even different exterior footprints for that matter)?

Thanks,

Omer Moltay, LEED AP
Mimta Ltd.


-----
Bu iletide virüs bulunmadı.
AVG tarafından kontrol edildi - www.avg.com
Sürüm: 10.0.1204 / Virüs Veritabanı: 1435/3416 - Sürüm Tarihi: 01.02.2011