[Equest-users] newbie question on simple modeling

[deepika khowal]

You should create your building first and edit the utility rates as per the
actual rates.
once you done with baseline all you need to do is create the new window type
with triple glazed specification and change the window type to the new
material in summary section in 3d view. all other parameters will not affect
yr comparison since you are changing just the glazing type and keepin HVAC
and otehr details constant while calculating the % savings

Regards
Deepika

On Wed, Oct 27, 2010 at 7:53 AM, Darrell Cherry <DCherry at jeberkowitz.com>wrote:

>  I need to utilize eQuest for basically one simple purpose; i.e. I am
> looking to change ONLY the makeup of the windows in a 19-story office
> building from monolithic glazing to a triple-glazed system.  The frame WILL
> NOT change.
>
>
>
> What I need to model is the current annual energy costs vs ne costs with
> improved fenestration system.
>
>
>
> Is this just too simplistic for eQuest?
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101027/cda06521/attachment.htm>