[Equest-users] newbie question on simple modeling

[Fleming, Joe]

Equest is perfect for this kind of comparison.  And, you should be able to complete the full comparison in the wizard mode.

If you want accurate results for the annual energy cost and savings, you will need to override some of the eQuest defaults and input the building specific information.

Joe Fleming
E.I., LEED AP BD+C, BEMP
Mechanical Engineer I

TLC Engineering for Architecture
Your 2030 Challenge Partner

800 Fairway Drive, Suite 250
Deerfield Beach, FL 33441-1816

phone:

954-418-9096

fax:

954-418-9296

direct:

954-418-4591

website:

www.tlc-engineers.com<http://www.tlc-engineers.com>


[cid:image001.gif at 01CB75CA.C7F90360]<http://www.tlc-engineers.com/>

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Darrell Cherry
Sent: Wednesday, October 27, 2010 10:54 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] newbie question on simple modeling

I need to utilize eQuest for basically one simple purpose; i.e. I am looking to change ONLY the makeup of the windows in a 19-story office building from monolithic glazing to a triple-glazed system.  The frame WILL NOT change.

What I need to model is the current annual energy costs vs ne costs with improved fenestration system.

Is this just too simplistic for eQuest?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101027/21fb3d15/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 5272 bytes
Desc: image001.gif
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101027/21fb3d15/attachment.gif>