[Equest-users] Fwd: Re: Question from a Beginner

[Grammy]

I have met this problem once:

at the beginning I called IT colleague to install eQuest by admin account,
then when I run it by my own account, eQuest asked a code.

My solution is that uninstall eQuest, and reinstall it by my own account, it
works fine~

On Tue, Oct 26, 2010 at 6:39 AM, Bruce Easterbrook <bruce5 at bellnet.ca>wrote:

>  Sorry I should have sent this to everyone.  It is a network issue.
>
> -------- Original Message --------  Subject: Re: [Equest-users] Question
> from a Beginner  Date: Mon, 25 Oct 2010 17:39:32 -0400  From: Bruce
> Easterbrook <bruce5 at bellnet.ca> <bruce5 at bellnet.ca>  To: Aldo Martinez
> Pinanez <Aldo.Martinez-Pinanez at student.uibk.ac.at><Aldo.Martinez-Pinanez at student.uibk.ac.at>
>
> uninstall it, there is no registration code.  Reinstall it and pick single
> user set-up or just me.  You initially picked network installation.
> Bruce
>
> On 25/10/2010 04:47 PM, Aldo Martinez Pinanez wrote:
>
> Dear All,
>
> I downloaded eQUEST. However, when I try to run it in my computer, it keeps
> asking for a software registration code.
>
> How do I get this code? Can someone help me?
>
> Best Regards,
>
> Aldo Martinez
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101026/322ff474/attachment.htm>