[Equest-users] Changing a exterior wall to an interior wall idetailed data mode

Nick Caton ncaton at smithboucher.com
Thu Oct 21 09:41:13 PDT 2010


Go to 3d view, right click the wall you want to be an interior wall, select the surface, properties... in the context menu (you'll see the surface selected highlighted by a red border to confirm you're looking at the right one), note the location/geometry information (I use alt-prtscn and paste into paint or an email.

 

Close the window, right-click one of the interior walls under the same space in your component tree, create new interior wall, copy one of the existing interior walls.

 

Alter the location/geometry to match the exterior wall's.  Change to adiabatic if it isn't already.

 

[Alternative to adiabatic - it's just one more step to actually tie your shells together.  Choose a "next to" space as the adjacent space in your second shell while defining your new interior wall's location/geometry.  Now you're modeling heat transfer between the shells!]  Close this window.

 

If you are tying the spaces together thermally per alternative above, delete both exterior wall sections and you're done.  If you really want to create two adiabatic walls instead (more work), don't delete the second before getting its' geometry/location info, then repeat the above procedure.

 

~Nick

 

 

 

NICK CATON, E.I.T.

PROJECT ENGINEER

25501 west valley parkway

olathe ks 66061

direct 913 344.0036

fax 913 345.0617

Check out our new web-site @ www.smithboucher.com 

 

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of TOPP - Per Topp
Sent: Thursday, October 21, 2010 10:48 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Changing a exterior wall to an interior wall idetailed data mode

 

Hi

 

I have got two shells that supposed to be next to each other and thus the wall between them should be an interior wall and adiabatic.

 

How do I change an exterior wall to an interior wall in the detailed data mode?

 

Best regards,

Per Topp 
Senior Projektingeniør 
Installation, El & VVS (Ballerup) 

Tel. dir. +45 44 85 87 09 
Mobile: +45 61 55 60 15 
TOPP at orbicon.dk

Orbicon | Leif Hansen A/S 
Lautrupvang 4B, DK-2750 Ballerup 
Tel. +45 44 85 86 87 Fax +45 44 85 86 78 

P Please consider the environment before printing.

It is possible to edit the contents of this e-mail electronically, therefore we cannot guarantee that it has not been changed after distribution. This e-mail may contain confidential information. Please be notified that if you are not the intended recipient, then you are prohibited from distributing, copying or archiving this e-mail. Please delete the e-mail and contact the sender as soon as possible.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101021/ef1b7fb4/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1459 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101021/ef1b7fb4/attachment.jpeg>


More information about the Equest-users mailing list