[Equest-users] 3.64 T24 compliance crashes my computer!

Wed Oct 20 12:53:03 PDT 2010

Consider trying to adjust the camera range in the .PD2 file.  Josh
shared this about a year ago.

[Equest-users] Lost 3-D Geometry Model

Josh Greenfield JGreenfield at primerachicago.com
<mailto:equest-users%40lists.onebuilding.org?Subject=Re%3A%20%5BEquest-u
sers%5D%20Lost%203-D%20Geometry%20Model&In-Reply-To=%3C1873B5FA036E5C44B
64225D88886F22C0114C30B%40pelexch1.primerachicago.com%3E> 
Sun Jan 17 10:17:46 PST 2010 

*	Previous message: [Equest-users] Lost 3-D Geometry Model
<http://lists.onebuilding.org/htdig.cgi/equest-users-onebuilding.org/201
0-January/003018.html> 
*	Next message: [Equest-users] Throttling Range
<http://lists.onebuilding.org/htdig.cgi/equest-users-onebuilding.org/201
0-January/003017.html> 
*	Messages sorted by: [ date ]
<http://lists.onebuilding.org/htdig.cgi/equest-users-onebuilding.org/201
0-January/date.html#3026>  [ thread ]
<http://lists.onebuilding.org/htdig.cgi/equest-users-onebuilding.org/201
0-January/thread.html#3026>  [ subject ]
<http://lists.onebuilding.org/htdig.cgi/equest-users-onebuilding.org/201
0-January/subject.html#3026>  [ author ]
<http://lists.onebuilding.org/htdig.cgi/equest-users-onebuilding.org/201
0-January/author.html#3026>  

________________________________

If "Reset Camera" AND  closing/re-opening doesn't work...close

eQuest...open your .PD2 file in Notepad and look at lines 13

(ClippingRange), 14 (FocalPoint) and 15 (Position)...

Proj   "Peck_Baseline"  

   ProgramVersion = "eQUEST 3.63.6510"

   BDBaseVersion = 24

   ProductCode = "eQUEST"

   WeatherFile = "TMY2\CHICAGIL.bin"

   CreateDate = 1255555885

   ModDate = 1262904952

   RunDate = 1262903881

   LibraryFile = "eQ_Lib.dat"

   ActiveMode = 0

   InputModule = 1

   UseCameraData = 1

   ClippingRange = ( 400.541, 1731.6 )

   FocalPoint = ( -89.875, 25.375, 18.0293 )

   Position = ( -807.176, 648.915, 295.315 )

If any of the values in there are HUGE (probably with exponents) then

just change them to zero...save...re-open eQuest.  These values are just

used by the eQuest camera so you're not changing any shell positions or

anything.

From: equest-users-bounces at lists.onebuilding.org
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>

[mailto:equest-users-bounces at lists.onebuilding.org
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
] On Behalf Of Katie

Tuttle

Sent: Friday, January 15, 2010 2:51 PM

To: Pandora Lei; equest-users at lists.onebuilding.org
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>

Subject: Re: [Equest-users] Lost 3-D Geometry Model

Right-click in the black area and choose "Reset Camera".  If that

doesn't work try closing and re-opening.

KATIE L. M. TUTTLE EI, LEED(r) AP

Mechanical Designer

Henderson Engineers, Inc.   8325 Lenexa Drive  Lenexa, KS 66214

dir 913 742 5508  tel 913 742 5000  fax 913 742 5001   www.hei-eng.com

<http://www.hei-eng.com/> 

From: equest-users-bounces at lists.onebuilding.org
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>

[mailto:equest-users-bounces at lists.onebuilding.org
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
] On Behalf Of Pandora

Lei

Sent: Friday, January 15, 2010 2:41 PM

To: equest-users at lists.onebuilding.org
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>

Subject: [Equest-users] Lost 3-D Geometry Model

Hi,

Does anybody knows how to retrieve  lost 3D Geometry Model. I was in

Detail Interface and editing the overhang... I guessed I click too fast

on the window and then ... the 3-D Geometry zoomed out(?) or

disappeared!?!? I still have 2-D but not the 3-D.

Any help or input is appreciated. Thanks. 

Pandora Lei, EIT

Mechanical Design Engineer

P2S Engineering, Inc.

5000 East Spring Street, 8th Floor

Long Beach, CA 90815-5218

T 562.497.2999  F 562.497.2990

www.p2seng.com <http://www.p2seng.com/> 

This email and any files transmitted with it are confidential and

are intended solely for the use of the individual or entity to whom

they are addressed.  This communication represents the originator's

personal views and opinions, which do not necessarily reflect those of

Henderson Engineers, Inc.  If you are not the original recipient or the

person responsible for delivering the email to the intended recipient,

be advised that you have received this email in error, and that any use,

dissemination, forwarding, printing, or copying of this email is

strictly

prohibited.  If you received this email in error, please immediately

notify administrator at hei-eng.com.
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>

-------------- next part --------------

An HTML attachment was scrubbed...

URL: <
http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/atta
chments/20100117/1ea5992e/attachment.htm>

-------------- next part --------------

A non-text attachment was scrubbed...

Name: not available

Type: image/gif

Size: 5566 bytes

Desc: image001.gif

URL: <
http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/atta
chments/20100117/1ea5992e/attachment.gif>

________________________________

*	Previous message: [Equest-users] Lost 3-D Geometry Model
<http://lists.onebuilding.org/htdig.cgi/equest-users-onebuilding.org/201
0-January/003018.html> 
*	Next message: [Equest-users] Throttling Range
<http://lists.onebuilding.org/htdig.cgi/equest-users-onebuilding.org/201
0-January/003017.html> 
*	Messages sorted by: [ date ]
<http://lists.onebuilding.org/htdig.cgi/equest-users-onebuilding.org/201
0-January/date.html#3026>  [ thread ]
<http://lists.onebuilding.org/htdig.cgi/equest-users-onebuilding.org/201
0-January/thread.html#3026>  [ subject ]
<http://lists.onebuilding.org/htdig.cgi/equest-users-onebuilding.org/201
0-January/subject.html#3026>  [ author ]
<http://lists.onebuilding.org/htdig.cgi/equest-users-onebuilding.org/201
0-January/author.html#3026>  

________________________________

More information about the Equest-users mailing list
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>

From: Greg Collins [mailto:GCollins at glumac.com] 
Sent: Tuesday, October 19, 2010 4:29 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] 3.64 T24 compliance crashes my computer!

I'm working on a project that was created using the gbxml -> GBS -> doe2
methodology.  I've had zero problems working with the file in detailed
edit mode and running normal simulations.  However, when I switch the
file into Title 24 2008 compliance analysis, it loads the compliance
rule list fine, but any subsequent modification to any compliance OR
non-compliance fields causes eQUEST (and my computer) to lock up.  I
thought at first it was just taking a while to make the change in this
large file, but even minor changes don't work.  I've tried changing wall
construction names, space names, air-side system type and some other
modifications - all to the same effect.

Has anybody had similar issues and hopefully solutions?  I appreciate
any feedback that can be provided.

Greg Collins
Design Engineer / Energy Analyst

Mechanical Department
LEED(r) Accredited Professional

  <http://www.glumac.com/> 

________________________________

18200 Von Karman Avenue, Suite 100
Irvine, CA 92612
T.  949.833.8190  F. 949.833.0252

Thinking. Inside the building.
www.glumac.com <http://www.glumac.com/>  
  <http://www.glumac.com/> 

________________________________________________________________________________________
Fanning/Howey Associates, Inc. intends to send this transmission (including any attachments) only to the
designated individual or entity.   If you received this message in error, please notify the sender by replying
to the electronic mail (if electronic) or by telephone at the number indicated on this document.
Fanning/Howey Associates, Inc. has taken reasonable precautions to ensure no viruses are present in the
electronic mail.  Fanning/Howey Associates, Inc., will not accept responsibility for any loss or damage arising
from the use of this electronic mail or attachments. Use, disclosure, dissemination, distribution, or reproduction
of this message by unintended recipients is not authorized and maybe unlawful.   Any information included in
this transmission that is not related to contracts with our authorization, verbal or written, by Fanning/Howey
Associates, Inc. may not be covered by our professional liability insurance. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101020/0c78b2b6/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 6582 bytes
Desc: image001.gif
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101020/0c78b2b6/attachment.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 1425 bytes
Desc: image002.gif
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101020/0c78b2b6/attachment-0001.gif>