[Equest-users] (no subject)

CJ csjoshi at asu.edu
Wed Oct 20 11:16:52 PDT 2010


Try 'reset camera' by right clicking on your 3D geometry screen. This is the
go-to option when your 3D model disappears or if you have turned it around
and want to see its default view. Of course if this is useless, please try
other methods as suggested here.

Thanks,
Charudatta

On Wed, Oct 20, 2010 at 10:57 AM, deepika khowal
<deepika.khowal at gmail.com>wrote:

> even i had similar problems... save your file and open again... or
> sometimes if you try to rotate or zoom yr model.. it might refresh by
> itself.
> Deepika
>
> On Wed, Oct 20, 2010 at 9:52 AM, Pasha Korber-Gonzalez <
> pasha.pkconsulting at gmail.com> wrote:
>
>> Sometimes there can be memory issues and the 3-D graphic viewer won't
>> refresh itself.  Usually when I run into this issue I need to close all the
>> other programs I'm running and shutdown eQuest.  I can either reopen the
>> files from here (with hopes that they have refreshed themselves or I will
>> have to re-start the computer all together.
>>
>> The 3-d viewer is separate from DOE2 and typically doesn't affect your
>> model if the graphic viewer is having issues.  They are two prgrams that run
>> side-by-side with each other in eQuest.
>>
>> pkg
>>
>> On Wed, Oct 20, 2010 at 1:22 AM, Erik Weiss <ew0187 at gmail.com> wrote:
>>
>>> I have created a 20 story building (with 6 floors underground) in the
>>> design wizard. the majority of the floors have different envelopes, however
>>> i am unable to see the 3-d model (3-d Geometry Tab). Is there any way to
>>> work around it and see why the model is not being built.
>>> _______________________________________________
>>> Equest-users mailing list
>>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>>> To unsubscribe from this mailing list send  a blank message to
>>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>>
>>
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Regards,

Charudatta Joshi (CJ)

csjoshi at asu.edu   |   480-748-7340
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101020/22920879/attachment.htm>


More information about the Equest-users mailing list