[Equest-users] (no subject)

[Pasha Korber-Gonzalez]

Sometimes there can be memory issues and the 3-D graphic viewer won't
refresh itself.  Usually when I run into this issue I need to close all the
other programs I'm running and shutdown eQuest.  I can either reopen the
files from here (with hopes that they have refreshed themselves or I will
have to re-start the computer all together.

The 3-d viewer is separate from DOE2 and typically doesn't affect your model
if the graphic viewer is having issues.  They are two prgrams that run
side-by-side with each other in eQuest.

pkg

On Wed, Oct 20, 2010 at 1:22 AM, Erik Weiss <ew0187 at gmail.com> wrote:

> I have created a 20 story building (with 6 floors underground) in the
> design wizard. the majority of the floors have different envelopes, however
> i am unable to see the 3-d model (3-d Geometry Tab). Is there any way to
> work around it and see why the model is not being built.
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101020/93a94b7e/attachment.htm>